Z Series E85 Z4 3.0i (N52) ROADST
51 21 235
Removing and installing/replacing Bowden
cable for inside door opener on left or right
front door
Necessary preliminary tasks:
•
Remove front door trim panel
Unhook Bowden cable for release lever:
-
Tighten release lever (1).
-
Lever out lock (2).
-
Detach Bowden cable (3) towards rear/top.
Installation:
For fitting, press release lever (1) fully onto door trim panel.
RA Removing and installing/replacing Bowden cable for inside door opener on left or
BMW AG - TIS
15.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
