Z Series E85 Z4 3.0i (N52) ROADST
51 24 050
Removing and installing/replacing lock
element (lock cylinder) for rear lid
Necessary preliminary tasks:
•
Remove lock cylinder trim
Disconnect plug connection (1).
Turn lock fastener with ignition key until screws (2) are
accessible.
Release screws (2) and remove bracket (3).
Installation:
Perform function check with rear lid open.
Turn lock fastener (1) through approx. 90
°
in direction of arrow
and feed out in inwards direction.
Release Bowden cable (1) from lock fastener (2).
RA Removing and installing/replacing lock element (lock cylinder) for rear lid
BMW AG - TIS
15.02.2013 23:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -