Z Series E85 Z4 3.0i (N52) ROADST
Adjustment by way of opening for outside door handle:
Remove outside door handle.
Slacken screw (1) in clockwise direction.
Slide clamping plate (3) upwards or downwards.
Note:
Screw (1) must be sufficiently slackened.
Tighten down screw (1) in counterclockwise direction.
Tightening torque 51 32 2AZ
.
Check adjustment, repeat procedure if necessary.
Adjustment by way of window guide rail:
Open door and lever out rubber plug (1).
Release nut (2) and move window guide rail.
Tighten nut (2).
Tightening torque 51 33 2AZ
.
Check adjustment, repeat procedure if necessary.
Ideal adjustment, longitudinal direction:
Close convertible top, door and door window glass.
Door window glass (1) must touch seal (2) in area of B-pillar.
Area (A) shows permitted area.
Area (A):
From tip of indentation (3) to max. 1.5 mm towards front
Adjusting longitudinal direction:
Remove outside door handle.
Slacken screw (1) in clockwise direction.
Slide door window glass (2) into desired position.
Note:
Clamping plate (3) must not be moved in the process.
Tighten down screw (1) in counterclockwise direction.
Tightening torque 51 32 2AZ
.
Check adjustment, repeat procedure if necessary.
RA Adjusting left or right front door window glass
BMW AG - TIS
15.02.2013 23:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
