bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Cover On Front Left Or Right Rollover Protecti > < 2 RA Removing And Installing_replacing Rear Left Or Right Upper Side Trim Section|Page 1632
Page 1
background image

51 43 015

Removing and installing/replacing rear left or
right lower side trim section

Necessary preliminary tasks:

Remove front entrance cover strip (inner)

Release seal (1).

Pull off cover (2) downwards.

Remove clips (3).

Installation:

Side trim (1) must not be damaged.

Attach clips (2) before installation.

RA  Removing and installing/replacing rear left or right lower side trim section

BMW AG - TIS

15.02.2013  23:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Cover On Front Left Or Right Rollover Protecti > < 2 RA Removing And Installing_replacing Rear Left Or Right Upper Side Trim Section|Page 1632