Z Series E85 Z4 3.0i (N52) ROADST
Lever out lugs (1) from cover (3) over holder (2).
Lever out cover (1) at rear.
Pull cover (1) at front out of guide and remove.
Installation:
Do not kink or crush cables (1) during installation.
Insert lugs (2) into mounts (3) and snap into place.
Disconnect plug connection (1).
Lever out lugs (2) and remove switch combination (3).
RA Removing and installing/replacing outer cover on front left or right seat (norma
BMW AG - TIS
16.02.2013 00:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
