Z Series E85 Z4 3.0i (N52) ROADST
52 14 070
Removing and installing/replacing seat angle
adjuster on left or right front seat
(normal/electric)
Necessary preliminary tasks:
•
Remove front seat
•
Remove outer cover
Release screws (1).
Release screw (2).
Unclip carrier (3) from seat mechanism at rear.
Unlock plug connection (1) on drive unit (2) and disconnect.
RA Removing and installing/replacing seat angle adjuster on left or right front sea
BMW AG - TIS
16.02.2013 00:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
