Z Series E85 Z4 3.0i (N52) ROADST
54 34 160
Removing and installing/replacing right
convertible top catch (automatic)
Necessary preliminary tasks:
•
Remove front convertible top fabric
Remove cover (2).
1 = Left cover
Release screws (1), turn reinforcement to one side.
Release screws (2), press engine frame downwards slightly.
Release screws (3), remove holder and lock.
Installation:
Replace screws (2).
Loosen screws (1).
Tightening torque: 54 31 15AZ
(replace screws).
Feed out catch (2) with Bowden cable towards rear top,
detaching drive shaft (3) from catch and feeding out Bowden
cable (4) with sensor.
RA Removing and installing/replacing right convertible top catch (automatic)
BMW AG - TIS
16.02.2013 01:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
