Z Series E85 Z4 3.0i (N52) ROADST
Release screws and remove main mount.
Replacement only:
Screw (1) must be replaced and is supplied with range of space
parts.
Installation:
Fit thin spacer between bracket and frame.
Return screws to original position.
Tighten down bolts.
Tightening torque: 54 31 12AZ
.
Replacement only:
•
Release screws (1) and remove spacers (2).
•
If necessary, release screw (3) and remove hardtop
mounting (4).
RA Removing and installing/replacing main mount for convertible top
BMW AG - TIS
16.02.2013 00:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -