Z Series E85 Z4 3.0i (N52) ROADST
Release screws (1).
Remove electronics box cover (2).
Disconnect plug connection (1).
Remove battery positive lead with wiring harness grommet (2)
from electronics box.
Installation:
Make sure wiring harness grommets (2) are correctly seated in
electronics box.
Remove cover cap (1) from B+ terminal.
Remove positive battery cable.
Unscrew nut (1).
Tightening torque 61 12 4AZ
.
Remove battery positive lead in downward direction.
RA Replacing battery positive lead (from luggage compartment connector to engine bu
BMW AG - TIS
16.02.2013 01:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -