Z Series E85 Z4 3.0i (N52) ROADST
61 31 083
Removing and installing/replacing switch for
unlocking rear lid
Note:
To unclip switch for unlocking rear lid (4), partially detach
mucket (1).
Grip from outside behind footwell side trim panel on A-pillar on
left (2).
Press retaining lugs (3) together and feed switch for unlocking
rear lid (4) out of footwell side trim panel on A-pillar on left (2).
If necessary, remove footwell side trim panel on A-pillar, left.
Disconnect associated plug connection and remove switch for
unlocking rear lid (4).
RA Removing and installing/replacing switch for unlocking rear lid
BMW AG - TIS
16.02.2013 02:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
