Z Series E85 Z4 3.0i (N52) ROADST
61 67 083
Removing and installing / replacing left or
right high-pressure nozzle of headlight
washer system
Necessary preliminary tasks:
•
Remove cover for headlight washer system
•
Remove front bumper trim.
Unlock high-pressure line (1) and detach from high-pressure
nozzle of headlight cleaning system (3).
Pull locks (2) in direction of arrow.
Pull high-pressure nozzle of headlight cleaning system (3) in
direction of arrow out of guides and feed out through opening in
bumper trim.
Installation:
Make sure high-pressure nozzle of headlight cleaning system (3)
is correctly seated.
New high-pressure nozzle of headlight cleaning system (3) is
already preadjusted.
RA Removing and installing / replacing left or right high-pressure nozzle of headli
BMW AG - TIS
16.02.2013 02:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
