Z Series E85 Z4 3.0i (N52) ROADST
63 12 860
Replacing control unit for left xenon headlight
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore disconnect all components from voltage
supply before removal.
Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.
Necessary preliminary tasks:
•
Remove left headlight (xenon headlight)
Release screws (1).
Remove control unit for xenon headlight (2) upwards from
headlight (3).
Installation:
When installing control unit for xenon headlight (1), make sure
sealing sleeve (2) is correctly seated.
RA Replacing control unit for left xenon headlight
BMW AG - TIS
16.02.2013 02:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -