Z Series E85 Z4 3.0i (N52) ROADST
64 11 208
Replacing heater core
Necessary preliminary tasks:
•
Remove heater.
Release screw (1).
Installation:
Tightening torque = 10
±
2 Nm (64 53 3AZ)
.
Remove adapter plate (2).
Release screws (3).
Installation:
Tightening torque = 1.0
±
0.3 Nm (64 11 1AZ)
.
Remove bulkhead adapter (4).
Withdraw heater element (5) in direction of arrow.
RA Replacing heater core
BMW AG - TIS
16.02.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
