Z Series E85 Z4 3.0i (N52) ROADST
64 11 225
Replacing controller for heater - A/C fan
Necessary preliminary tasks:
•
Remove radio receiver.
•
Remove right glovebox with housing.
Unclip right footwell channel (1).
Installation:
Make sure right footwell channel (1) is correctly seated in retainer
(2).
Unclip right footwell channel (1) and remove in direction of arrow.
Installation:
Make sure right footwell channel (1) is correctly seated in retainer
(2).
Unlock plug connection (1) and disconnect.
Release screw (2).
Installation:
Tightening torque = 1.0
±
0.3 Nm (64 11 3AZ)
.
Pull out controller for heater - A/C fan (3) in direction of arrow.
Installation:
Make sure controller for heater - A/C system fan (3) is correctly
seated in housing of heater - A/C system.
RA Replacing controller for heater - A/C fan
BMW AG - TIS
16.02.2013 03:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
