Z Series E85 Z4 3.0i (N52) ROADST
Release screw (1).
Installation:
Tightening torque 64 52 3AZ
.
Replace aluminium screw/bolt.
Note:
Secure compressor (3) against falling off/down.
Disconnect plug connection (1).
Release bolt (2) and remove compressor (3) towards front.
Installation:
Replace faulty adapter sleeves.
Replace aluminium screw/bolt.
Tightening torque 64 52 3AZ
.
After installation:
•
Evacuate and fill A/C system
•
When removing coolant thermostat: Vent cooling system and
check for leaks
RA Replacing compressor for air-conditioning system (N52)
BMW AG - TIS
16.02.2013 03:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -