bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing _ Replacing Drier Bottle For Air Conditioner|Page 2258 > < 5 RA Replacing Valve Insert For Refrigerant Line|Page 2256
Page 1
background image

64 53 510

Removing and installing / replacing drier
bottle for air conditioner

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for replacing desiccant cartridge.

Follow instructions for opening and replacing parts in
refrigerant circuit.

If A/C system is opened for more than 24 hours:

Replacing desiccant insert for A/C system

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Installation:

Observe gap between top edge of dryer bottle (1) and top edge
of holder (2):

A=30mm

RA  Removing and installing / replacing drier bottle for air conditioner

BMW AG - TIS

16.02.2013  03:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing _ Replacing Drier Bottle For Air Conditioner|Page 2258 > < 5 RA Replacing Valve Insert For Refrigerant Line|Page 2256