Z Series E85 Z4 3.0i (N52) ROADST
65 11 080
Removing and installing/replacing radio
receiver
Necessary preliminary tasks:
•
Remove center fresh air grill
Release screws (1).
Pull out radio receiver (2) in direction of arrow, unlock and
disconnect associated plug connections.
Remove radio receiver (2).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
If necessary, car & key memory
•
CD "CIP"
RA Removing and installing/replacing radio receiver
BMW AG - TIS
16.02.2013 03:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -