Z Series E85 Z4 3.0i (N52) ROADST
Erasure of initialization:
•
Open door window glass fully
•
Operate power window switch in "Open" position four times
within 10 seconds
This erases initialization of the power window, anti-trapping
protection and toll function are inactive.
Check whether one-touch control (toll) function is inactive,
otherwise repeat procedure.
Reinitialization:
Avoid a break between the two steps!
•
Open door window glass fully
•
Operate and hold power window switch in "Close" position
(second switch stage)
•
Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds
longer
•
Open door window glass fully
•
Operate and hold power window switch in "Close" position
(second switch stage)
•
Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds
longer
This completes initialization.
Note:
Carry out function check (one-touch control function, anti-trapping
protection and, if necessary, comfort function).
RA Notes on initializing power window unit (from 04/2004)
BMW AG - TIS
16.02.2013 04:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
