Z Series E85 Z4 3.0i (N52) ROADST
72 11 041
Removing and installing/replacing front left or
right lower belt fitting (seat belt tensioner)
Necessary preliminary tasks:
•
Remove front seat
Release catches (1) and remove housing (2).
Release catch (1) at front/rear.
Open cover (2).
Disconnect plug connection (3).
Replacement only:
If necessary, unpin wiring harness (5) from housing (4).
Feed out wiring harness (1).
Release screw (2).
Tightening torque 72 11 03AZ
.
Remove belt tensioner (3).
Installation:
Belt tensioner (3) is secured at opening (4).
RA Removing and installing/replacing front left or right lower belt fitting (seat b
BMW AG - TIS
16.02.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
