Z Series E85 Z4 3.0Si (N52) ROADST
Remove and insert oil filter element (1) in direction of arrow.
Replace O-rings (2).
Installation:
Lubricate all O-rings (2) with engine oil.
Tightening torque: 11 42 1AZ
.
Remove engine oil drain plug (1).
Installation:
Replace sealing ring.
Tightening torque: 11 13 1AZ
Note:
Illustration does not show underbody protection.
Assemble engine.
Checking engine oil level:
•
Park vehicle on a horizontal surface.
•
Allow engine at normal operating temperature to run for 3
minutes with increased revs (approx. 1100 rpm).
•
Read off engine oil level in instrument cluster or on Control
Display.
RA Engine oil service incl. supplementary service (N52)
BMW AG - TIS
16.02.2013 21:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
