Z Series E85 Z4 3.0Si (N52) ROADST
Mount special tools 11 4 461 with screw (1) to inside of cylinder
head.
On cylinder 2 mount special tool 11 4 461 with screw (1)
facing outwards.
Position special tools 11 4 461 so that screw connections (2)
of bearing bank are easily accessible.
Tighten lower and upper bearing banks with special tool
00 9 120 .
Tightening torque: 11 31 1AZ
.
Important!
Remove special tool 11 4 461 only when camshaft screw
connection is completed.
Assemble engine.
RA Removing and installing / replacing exhaust camshaft (N52)
BMW AG - TIS
16.02.2013 22:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
