Z Series E85 Z4 3.0Si (N52) ROADST
Important!
Incorrect installation possible.
Press clamping rail (1) by hand against timing chain and make
sure timing chain is guided in clamping rail (1).
Note:
Schematic representation on removed chain drive.
Adjust valve timing.
Fit chain tensioner.
Assemble engine.
RA Removing and installing/replacing inlet and exhaust adjustment units (N52)
BMW AG - TIS
16.02.2013 22:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
