Z Series E85 Z4 3.0Si (N52) ROADST
11 44 000
Removing and installing/replacing oil-water
heat exchanger (N52)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Detach coolant hoses.
•
Pull off protective cap.
Release screws (2).
Tightening torque: 11 42 3AZ
.
RA Removing and installing/replacing oil-water heat exchanger (N52)
BMW AG - TIS
16.02.2013 22:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -