Z Series E85 Z4 3.0Si (N52) ROADST
Unfasten hose clip (1).
Detach water pipe in direction of arrow from water pump (2).
Unfasten hose clip (1).
Detach water hose (3) from water pipe (2).
Installation:
Replace sealing ring (2).
Sealing lip (1) on water pipe (3) must not show any traces of
damage.
If necessary, replace water pipe (2).
Assemble engine.
Vent cooling system and check for leaks.
RA Removing and installing/replacing water pipe (N52)
BMW AG - TIS
16.02.2013 22:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
