Z Series E85 Z4 3.0Si (N52) ROADST
Disconnect plug connection for lambda control sensor.
Detach oxygen sensor (1) from cylinders 4 to 6 with special
tool 11 4 260 .
Oxygen sensor at cylinders 1 to 3 is accessible from above
without the exhaust system having to be removed.
Installation:
Cable colour black, cylinders 1 to 3.
Cable colour gray, cylinders 4 to 6.
Tightening torque: 11 78 1AZ
.
Assemble engine.
Check function of DME.
RA Removing and installing/replacing both lambda oxygen control sensors (N52)
BMW AG - TIS
16.02.2013 22:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -