Z Series E85 Z4 3.0Si (N52) ROADST
22 31 001
Replacing rubber mount for transmission
mounting (N52)
Necessary preliminary tasks:
•
Remove rear underbody protection
•
Remove heat shields
•
Support transmission with hydraulic lifter.
Release screws (1) and nuts (2).
Remove transmission cross-member.
Remove rubber mount from transmission cross-member.
Tightening torque 24 71 1AZ/2AZ
.
RA Replacing rubber mount for transmission mounting (N52)
BMW AG - TIS
16.02.2013 23:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
