Z Series E85 Z4 3.0Si (N52) ROADST
22 32 050
Replacing cross-member for transmission
mounting (N52)
Necessary preliminary tasks:
-
Remove exhaust system.
-
Remove heat shields
Support transmission with hydraulic jack.
Release screws (1).
Tightening torque: 22 32 4AZ
.
Unscrew nuts (2).
Tightening torque: 22 32 3AZ
.
Remove cross-member.
RA Replacing cross-member for transmission mounting (N52)
BMW AG - TIS
16.02.2013 23:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -