Z Series E85 Z4 3.0Si (N52) ROADST
24 00 030
Removing and installing automatic
transmission (6HP19Z/N52)
Special tools required:
•
00 2 030
•
00 9 010
•
00 9 120
•
00 9 130
•
23 0 132
•
23 4 050
•
24 1 110
•
24 2 390
•
24 4 160
•
24 4 161
•
24 4 165
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
RA Removing and installing automatic transmission (6HP19Z/N52)
BMW AG - TIS
17.02.2013 00:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
