Z Series E85 Z4 3.0Si (N52) ROADST
Screw in special tool 24 2 351 until it is firmly connected with
shaft seal.
Pull out radial shaft seal by screwing in special tool 24 2 352 .
Oil sealing lip of radial seal (1). Drive in radial seal (1) with
special tool 24 2 370 as far as it will go.
RA Replacing output flange shaft seal (GA6HP19)
BMW AG - TIS
17.02.2013 00:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
