Z Series E85 Z4 3.0Si (N52) ROADST
24 14 002
Replacing selector shaft seal (GA6HP19)
Special tools required:
•
24 5 361
•
24 5 362
•
24 5 364
•
24 5 366
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
-
Remove heat shields
Note:
Version 1:
Grip clamping sleeve (1) and slacken nut (2).
Detach retainer (3) downwards using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever.
RA Replacing selector shaft seal (GA6HP19)
BMW AG - TIS
17.02.2013 00:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
