Z Series E85 Z4 3.0Si (N52) ROADST
Attach special tool 24 2 353 to drive shaft (1).
Screw in special tool 24 2 351 until it is firmly connected with
shaft seal.
Screw in special tool 24 2 352 to remove shaft seal.
Oil sealing lip on shaft seal.
Drive in shaft seal (1) with special tool 24 2 400 as far as it will
go.
RA Replacing torque converter flange shaft seal (GA6HP19Z)
BMW AG - TIS
17.02.2013 00:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -