Z Series E85 Z4 3.0Si (N52) ROADST
Note:
Illustrated parts belong to special tool 00 7 500 .
Pull bearing with special tools 00 7 500 and 00 5 015 off
steering tube.
Installation:
Set steering tube down on a suitable block.
Drive bearing with special tool 32 3 071 onto steering tube as
far as it will go.
Important!
Make sure all parts are absolutely clean.
Do not degrease steering tube.
Regreasing is not permitted!
Installation:
Align steering tube by way of coding (1) to toothed shaft and
push tube onto shaft.
RA Replacing steering tube bearing
BMW AG - TIS
17.02.2013 01:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
