Z Series E85 Z4 3.0Si (N52) ROADST
32 31 082
Removing and installing/replacing steering
angle sensor
Special tools required:
•
32 3 040
Necessary preliminary tasks:
•
Disconnect and connect battery.
•
Remove steering column.
After installation:
•
Replacement only: Carry out programming/coding
•
Carry out steering angle sensor adjustment
Detach lug (1) and bushing (2).
Installation:
Replace bushing.
Press down both locking hooks.
Detach steering angle sensor.
RA Removing and installing/replacing steering angle sensor
BMW AG - TIS
17.02.2013 01:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
