Z Series E85 Z4 3.0Si (N52) ROADST
33 55 021
Replacing both rubber mounts for stabilizer
mounting
Release nuts and remove screws towards rear.
Remove stabilizer from rear axle carrier.
Remove retaining bracket and rubber mount on both sides.
Installation:
Keep retaining bracket, rubber mount and stabilizer clean and free
from oil and grease.
Replace self-locking nuts.
Tightening torque 33 55 3AZ
.
RA Replacing both rubber mounts for stabilizer mounting
BMW AG - TIS
17.02.2013 02:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
