Z Series E85 Z4 3.0Si (N52) ROADST
Slide locking clip (1) to one side.
Grip door window glass (4) and detach mounting (3) from power
window (2).
Turn door window glass (4) and lift out.
Installation:
Adjust door window glass.
Installation:
Sliding block (1) must be correctly positioned in mounting (2).
Clamping plate (4) must be correctly engaged with slider (3) on
door window glass (5).
Replacement:
Lever out catch (2) from shim (4) and remove with clamping
plate (3) from door window glass (1).
When replacing clamping plate or slider:
Lever out catches (5) and remove clamping plate (3) from
slider (4).
RA Removing and installing / replacing door window glass, front left or right
BMW AG - TIS
17.02.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
