Z Series E85 Z4 3.0Si (N52) ROADST
Ideal adjustment, retraction depth:
Close convertible top, door and door window glass.
Stick adhesive tape at front and rear onto door window glass at
height of window cavity cover strip.
Open door and manually close door lock rotary striker.
Measure gap (A) between adhesive tape and window cavity
cover strip.
Gap (A) max. 3.5 mm.
Note:
Gap (A) must be the same at front and rear.
Door window glass must run parallel to cover strip.
Door window glass must engage at top in seals.
Adjusting retraction depth:
Open door and door window glass.
Lever out rubber plugs (1 and 2).
Adjust height uniformly via adjusting screw (3) at front and rear.
Note:
Adjustment values must be the same at front and rear.
Door window glass must run parallel to cover strip.
Check adjustment, repeat procedure if necessary.
Note:
Reinitialize power unit after completing adjustment work on door,
door window glass or convertible top.
Refer to Notes on initializing power window unit.
RA Adjusting left or right front door window glass
BMW AG - TIS
17.02.2013 13:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -