Z Series E85 Z4 3.0Si (N52) ROADST
51 33 000
Removing and installing (replacing) power
window unit in left or right front door
Necessary preliminary tasks:
•
Remove door window glass
Important!
Disconnect plug connection (1) from power window
motor (2) (risk of trapping).
Installation:
Carry out function check on power window unit and anti-trapping
protection.
If necessary, initialize power window.
Lever out cover (1) and release nut underneath.
Tightening torque 51 33 3AZ
.
Slacken nut (2).
Tightening torque 51 33 4AZ
.
Detach drive cables (3) from clips (1 and 2).
Installation:
Clip drive cables (3) correctly into clips (1 and 2).
Opening of clip (1) points forwards and that of clip (2)
downwards.
RA Removing and installing (replacing) power window unit in left or right front doo
BMW AG - TIS
17.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
