Z Series E85 Z4 3.0Si (N52) ROADST
51 41 000
Removing and installing left or right front
door trim panel
Special tools required:
•
00 9 317
Warning!
Model with side airbag:
Follow safety instructions for working on cars with airbag
systems.
Important!
Do not use any sharp-edged tools to remove the panel - risk
of damage to airbag.
Necessary preliminary tasks:
•
Release screw on inside door opener
•
Release screws on inside door handle
Lever out airbag emblem (1) with special tool 00 9 317 and
release screw underneath.
Tightening torque 51 41 1AZ
.
Unclip clips (2) of door trim with special tool 00 9 317 .
RA Removing and installing left or right front door trim panel
BMW AG - TIS
17.02.2013 13:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
