Z Series E85 Z4 3.0Si (N52) ROADST
51 43 ...
Removing and installing/replacing trim
behind rollover bar on left or right
Important!
With trim (2) removed, the convertible top (3) can be
damaged by sharp edges in the area of the belt guide (1).
Cover this area before actuating the convertible top (3).
Unlock convertible top (3), raise slightly and pull off trim (2)
towards rear.
Installation:
Feed in trim (2) below belt guide (1) and trim (4).
Make sure intermediate rings are correctly seated on trim (4).
Installation:
Retaining lugs (2) on trim (1) must not be damaged or missing.
RA Removing and installing/replacing trim behind rollover bar on left or right
BMW AG - TIS
17.02.2013 13:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
