Z Series E85 Z4 3.0Si (N52) ROADST
51 45 030
Removing and installing instrument panel
trim
Note:
Observe the following instructions to facilitate removal of the
instrument panel trim:
•
Move seats back completely and lower
•
Open convertible top
Necessary preliminary tasks:
•
Remove center console
•
Remove trim for roof pillar, front left and right
•
Remove finisher on panel for instrument panel, right
•
Remove control panel for heater - A/C system
•
If necessary, remove Central Information Display
•
Remove fixture for steering column stalks
•
Remove instrument cluster
•
Remove light switch unit
•
Remove footwell side trim panel on A-pillar, left
•
Remove airbag module for driver's knee protection
•
Remove footwell side trim panel on A-pillar, right
•
Remove airbag module on passenger side
Release screw (1) on support tube (2).
RA Removing and installing instrument panel trim
BMW AG - TIS
17.02.2013 13:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -