Z Series E85 Z4 3.0Si (N52) ROADST
Unlock OBD socket connector (1) and unclip in direction of arrow.
Release nut (2) in area of left air duct.
Disconnect plug connection (1) on passenger airbag switch (2).
Release nut (3) in area of right air duct.
Pull back trim for instrument panel (1) and remove.
Installation:
Make sure guides (1) of instrument panel trim (2) are correctly
seated in mountings.
RA Removing and installing instrument panel trim
BMW AG - TIS
17.02.2013 13:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -