Z Series E85 Z4 3.0Si (N52) ROADST
Note:
Version with switch for front passenger airbag deactivation only:
•
If necessary, saw out missing opening using a body saw.
•
Carry over dimensions for opening from fitted instrument
panel trim.
Release screw (1).
Remove complete three-part air duct (2) in direction of arrow
from instrument panel trim (3).
Installation:
Make sure complete three-part air duct (2) is correctly seated in
mountings (4).
Installation:
Make sure side air ducts (1) and (2) are correctly seated in
middle air duct (3).
Unscrew nuts (1).
Remove frame for front passenger airbag (2) in direction of arrow
from instrument panel trim (3).
RA Replacing instrument panel trim
BMW AG - TIS
17.02.2013 13:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -