Z Series E85 Z4 3.0Si (N52) ROADST
51 49 ...
Removing and installing/replacing recessed
handle/lock cylinder trim on rear lid
Grip recess plate:
Note:
Shown with view of fitted recessed handle from inside of rear lid.
Release screws in area (1).
Remove recessed handle (2) in direction of arrow.
Installation:
Following parts of recessed handle (2) must not be damaged or
missing:
(3)
Retaining hooks
(4)
Catch
Lock cylinder trim:
Note:
Shown with view of fitted lock cylinder trim from inside of rear lid.
Release screws in area (1).
Remove trim (2).
Version with emergency release:
Disengage handle and Bowden cable (3).
RA Removing and installing/replacing recessed handle/lock cylinder trim on rear lid
BMW AG - TIS
17.02.2013 13:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -