Z Series E85 Z4 3.0Si (N52) ROADST
51 71 038
Removing and installing/replacing front left or
right wheel arch cover
Note:
Right side only:
Before removing wheel arch cover, unclip two cable holders in
area of bulkhead.
Release expansion rivets (3).
Release screws (2) and remove wheel arch cover (1).
Installation:
Make sure front wheel arch cover (1) is correctly seated on side
wall.
RA Removing and installing/replacing front left or right wheel arch cover
BMW AG - TIS
17.02.2013 13:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
