Z Series E85 Z4 3.0Si (N52) ROADST
54 31 060
Removing and installing/replacing left or right
convertible top catch (mechanical)
Necessary preliminary tasks:
•
Remove convertible top fabric from 1st bow.
Remove cover (1 or 2) upwards.
Loosen screws (1).
Tightening torque: 54 31 15AZ
.
Releasing actuating rod (2):
-
Slide retainer spring (3) to end of rod.
-
Detach actuating rod from ball end.
Installation:
Basic adjustment is necessary in event of replacement:
-
Install both catches and turn cross.
-
Move safety catch (1) into closed position.
-
Check dimension A = 78.5
±
0.5 mm.
-
The dimension can be altered by turning the ball socket (2):
•
Screw in = dimension A is reduced
•
Screw out = dimension A is increased
RA Removing and installing/replacing left or right convertible top catch (mechanica
BMW AG - TIS
17.02.2013 14:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -