bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

24 RA Replacing Convertible Top Fabric|Page 1879 > < 24 RA Replacing Convertible Top Fabric
Page 2
background image

Release front strap (1) on left/right.

Drill out blind rivets (2) on left/right.

Remove trim, if necessary suspend from roofliner.

Release screws in area (1).

Detaching fabric from bow 1:

Pull fabric in middle towards front and fold upwards at rear.

Pull fabric over a corner towards front and fold upwards at

rear.

If necessary, use special tool 00 9 321 .

Pull off fabric over other corner.

Drill out rivet joint (1) on left/right.

Feed out tension cable bearing (2) to one side.

Installation:

Replace shims.

RA  Replacing convertible top fabric

BMW AG - TIS

17.02.2013  14:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

24 RA Replacing Convertible Top Fabric|Page 1879 > < 24 RA Replacing Convertible Top Fabric