Replacing Wiring Harness for Electrically Adjustable Front Seat in Z4 30Si
61 12 250
Replacing wiring harness for electrically
adjustable front seat
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove front seat
•
Remove outer cover on front seat
Disconnect plug connection (1).
Disconnect plug connection (1).
Disconnect plug connections (1) on pin housing (2).
Release and feed out seat wiring harness.
Installation:
Make sure seat wiring harness is correctly laid.
RA Replacing wiring harness for electrically adjustable front seat
BMW AG - TIS
17.02.2013 15:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -