Z Series E85 Z4 3.0Si (N52) ROADST
61 13 021
Replacing fuse box for distribution box
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove right glovebox with housing
•
Remove trim for instrument panel, bottom left
Release screws (1).
Pull fuse box (2) downwards.
Installation:
Make sure pin (1) is correctly seated in guide (2).
Disconnect plug connection (1).
Detach all fuses.
Open cover (2).
Unscrew nut (3).
Disconnect battery positive lead (4) from fuse box.
Installation:
Make sure battery positive lead is correctly seated.
Tightening torque 61 13 2AZ
.
RA Replacing fuse box for distribution box
BMW AG - TIS
17.02.2013 15:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -