Z Series E85 Z4 3.0Si (N52) ROADST
61 35 147
Removing and installing/replacing convertible
top module
Special tools required:
•
00 9 323
Necessary preliminary tasks:
•
Disconnect battery negative lead
Lever out cover (1) with special tool 00 9 323 and remove.
Note:
For purposes of clarity, the rear side trim is shown removed.
Unscrew nut (1).
Feed out convertible top module (3) through created opening.
Unlock plug connections (2) and disconnect.
Remove convertible top module (3).
RA Removing and installing/replacing convertible top module
BMW AG - TIS
17.02.2013 15:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
