Z Series E85 Z4 3.0Si (N52) ROADST
63 99 002
Replacing halogen bulb for left (or right) high-
beam headlight
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Note:
Front wheel removed for purposes of clarity.
Unlock fasteners (1) by turning counterclockwise through 180
°
and fold up cover (2) in direction of arrow.
Lift locking bracket (1) out of mounts (2) and fold down in
direction of arrow.
Feed out housing cover (3) in direction of arrow and remove.
Installation:
Ensure correctly seating of seal in housing cover (3) and of
housing cover (3) in relation to headlight housing.
Version with xenon headlights:
Turn bulb holder (1) in direction of arrow and remove from
headlight.
Installation:
Make sure bulb holder (1) is correctly seated in headlight.
RA Replacing halogen bulb for left (or right) high-beam headlight
BMW AG - TIS
17.02.2013 16:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
